Windows 7 ULTIMATE x86 / x64 FULLY ACTIVATED

INSTRUCTIONS:
Install:
- Download and extract using WinRAR.
- Use Nero or other burning app to burn the ISO image
- Burning speed should not be faster than 4x. Otherwise, it might not

work.
- Restart your computer.
- Make sure you have selected your DVD-ROM/RW drive as a first boot

device.

* Enter the BIOS pressing the DEL button, set the option, insert your

Windows 7 installation and restart computer.
- The black screen will appear (image 01).
- Press any key to boot from CD or DVD.... (by pressing the key you are

entering the setup)
- Select your language, time and currency and keyboard input (optionaly)
- Click install now
- Choose your edition (x86 is 32-bit, x64 is 64-bit) depending of CPU type

you have.

*Choose x64 if you have 64-bit processor.
- Click "I accept".
- Click "Custom" (advanced).
- Choose your partition/hdd drive where Win7 should be installed and click

format.

*You might get some error if you have two or more hard disks with

different connectors (ATA and SATA). If you get an error, turn off one of

your hard disks and repeat the whole proces.
- After formatting, setup will continue automaticly and it will finish

after 15-30 min.
- Next step would be username
- Type your password (if you want).
- When you get the screen for CD-KEY just ignore it leaving blank.

*Uncheck the box for automaticly activation and click next.
- Choose the third option for next step.
- Select your time zone.
- Select your current location (Home is recommended).
- The black CMD windows will appear. Wait a few seconds until computers

restares once again.
- And that would be all about installation. You are in Windows now.

Activation:
It is not required, because it is OEM. Windows will be premanently

activated.
However, it is well known that there is some problems with DELL and HP

machines.
So if you have issues with pre-activation you will be forced to some

activator to activate Windows 7.

INSTALLATION NOTES :

--> Remember when Windows is finalizing its installation, a black screen

will appear (cmd), it will stay like this for about 2 to 10 mins Depending

on the system you are using Then It Will say ***-***-***-***-**** Key

installed successfully. Then it will restart automatically. After this,

you can go to My computer's Properties, Windows is NOW activated!

--> FOR DELL and HP machines 80% : the activators will work meanwhile the

other 20% depends on how old your laptop/computer, If you did an upgrade

you will have to use an external activator because this version was made

for a clean installation.

--> If you do not want to be forced to use an activator. I would do a

custom install but you don't really have to format your driver due to the

fact that Windows 7 will just overwrite your current windows and put the

old windows in a folder called "Windows.old" where your previous windows

installion files are kept. And it is optional if you choose to delete the

old folder because the drivers are there after installation. Make sure you

are connected to the internet before and after the installation.
Go for the fresh Installation if you dont really have important programs

you can easily re-install at a later time. ( I RECOMMEND THIS )